Table of Contents
Advertisement
Composite-ARF Extra 300L (2.12m/84")
techsupport@composite-arf.com
A view of the complete Extra 2.12m (84") kit contents - Product #721000
About the Extra 2.12m (84")
The Composite-ARF Extra 2.12m is far more pre-fabricated than our original 2 x 2 Extra.
The fin post, rudder hinging, composite firewall and exhaust tunnel, wing and stab anti-rotation
pins, wing fixing bolts, landing gear support..... all these are now factory completed for you. In
addition a clear cockpit canopy is now included, for those of you that prefer this to the fibre-
glass canopy. The elevators are now factory-hinged for you, using 4 Robart pin-hinges per
side - to allow additional throw for those wild 3D manoeuvres that this plane loves to do!
A very complete hardware pack is included, with almost everything needed to complete the
servo/motor and landing gear installation in the plane. Of course, all the small wood parts, phe-
nolic servo arm extensions and control horns, milled plywood firewall and servo mounts are
also included in the kit.
The flying characteristics of the 2.12m Extra are quite similar to the original 2 x 2m Extra. The
5% larger wing allows a bit more overall weight without increasing the wing loading, and gas
engines of between 40 and 50 cc power the new 2.12m Extra ballistically!
Great performance, very similar to the full blown Extra 300s of Composite-ARF, very neutral,
light-winged and extremely precise. The 2.12m Extra is an ideal 'Everyday Workhorse', allow-
ing you to keep the more sophisticated larger planes for those "special days".
......And all this at a never before achieved value-for-money price !
Did you read the hints and warnings above and the instructions carefully?
Did you understand everything in this manual completely?
Then, and only then, let's start assembling your Composite-ARF Extra ...
8
Advertisement
Table of Contents
