Troubleshooting - Philips HQ6900 series User Manual

Problem Possible cause
Reduced shaving The shaving heads are dirty. You
performance. have not cleaned the shaver
well enough or you have not
cleaned it for a long time.
Long hairs obstruct the shaving
heads.
The shaving heads are damaged
or worn.
The shaver does The shaver is not connected to
the mains.
I push the on/off
slide upwards.
used to the Philips shaving
system.
4 Remove the shaving heads and place new ones in the shaving unit.
5 Put the retaining frame back into the shaving unit, push it down (1)
and turn the wheel clockwise (2).
6 Put the shaving unit back onto the shaver.

Troubleshooting

This chapter summarises the most common problems you could
encounter with the appliance. If you are unable to solve the problem with
country.
Solution
Clean the shaver thoroughly before you
continue shaving. See chapter 'Cleaning and
maintenance'.
Clean the cutters and guards with the cleaning
brush supplied. See chapter 'Cleaning and
shaving heads'.
Replace the shaving heads every 2 years
for optimal shaving results. See chapter
'Replacement'.
usually disappears.
www.philips.com/support for a list of
ENGLISH
9