Tools Needed - Craftsman 315.228510 Owner's Manual

TOOLS NEEDED

The following tools are needed for assembly and alignment. Note: The five hex keys listed below have been
provided with your saw. The remaining tools are typical shop tools and are not included with your saw.
SMALL / MEDIUM
NUT DRIVER
PHILLIPS SCREWDRIVER
8 mm, 10 mm, and 12 mm
HEX KEYS (PROVIDED)
2 mm, 3 mm, 4 mm, 5 mm, and 6 mm
COMBINATION SQUARE
HAMMER
°
45 TRIANGLE
WRENCHES: 8 mm, 10 mm, and 12 mm
ADJUSTABLE WRENCH
FRAMING SQUARE
Fig. 3
14
® TABLE SAW 315.228510