Firmware Version; Pro Defaults - ADJ INNO COLOR BEAM QUAD 7 User Instructions

Inno Color Beam Quad 7
tons to adjust the value. Once you have made your adjustment
press ENTER.
4. Repeat steps 2-3 until satisfied.
Manual Test
- With this function you can manually test
the individual features.
1. Press the MENU button until "Manual Test" is displayed,
press ENTER.
2. Use the UP or DOWN buttons to find the functions or colors
that you wish to test. You can also test the strobe function and
dimmer.
3. Once you find a function or color you wish to test, press the
ENTER button, the displayed value will begin to flash. You can
now adjust the values by pressing the UP and DOWN buttons.
Once you have finished testing press the ENTER button.
4. To exit the manual test mode, press the MENU button.
Auto Test
- This function will run a self test program.
1. Press the MENU button until "Auto Test" is displayed, press
ENTER.
2. The fixture will now run a self test. Press the MENU button to
exit.
Temp.
- With this function you can display the running
temperature of the unit.
1. Tap the MENU button until "Temp." is displayed, press
ENTER.
2. The current running temperature of the fixture will now be dis-
played. Press MENU to exit.
ADJ Products, LLC - www.adj.com - Inno Color Beam Quad 7 User Manual Page 12
System Menu Inno Color Beam Quad 7
Fixture Time
running time of the unit.
1. Tap the MENU button until "Fixture Time" is displayed, press
ENTER.
2. The running time of the fixture will now be displayed. Press
MENU to exit.

Firmware Version

sion
1. Tap the MENU button until "Firmware Version" is displayed.
Press the ENTER button and the software vesion will be dis-
played.
2. Press the MENU button to leave this function.

PRO Defaults

1. Tap the MENU button until "PRO Defaults" is displayed, press
ENTER.
2. Either "YES" or "NO" will now be displayed. Press the UP or
DOWN buttons to select "YES" to switch back to defualt set-
tings, and press ENTER.
Reset
1. Tap the MENU button until "RSET" is displayed, press
ENTER.
2. The fixture will now reset.
ADJ Products, LLC - www.adj.com - Inno Color Beam Quad 7 User Manual Page 13
- With this function you can display the
- This will display the software ver-
- Restore all functions to their defaults.
- Use this function to reset the unit.
System Menu