Using The Power Switch; Shutting Down - Panasonic CF-M34 Series Reference Manual

Standby/Hibernation Functions

Using the Power Switch

Setting
Windows 2000
1 Select [Start] - [Settings] - [Control Panel] - [Power Options].
2 In [Advanced], select [Standby] or [Hibernate] for [When I press the power button
on my computer] and then select [OK].
Windows XP
1 Select [Start] - [Control Panel] - [Performance and Maintenance] - [Power Op-
tions].
2 In [Advanced], select [Stand by] or [Hibernate] for [When I press the power button
on my computer], then select [OK].

Shutting down

(After releasing your finger from the
power switch, do not touch the power
switch until the power indicator goes
off or blinks.)
CAUTION
At the "beep*" sound, release your finger from the power switch. If you continue
to slide the power switch and hold it for more than four seconds, the computer
will emit a second "beep*" then power off. Data not previously saved will be lost.
Windows 2000
Even when [When I press the power button on my computer] is set to [Power Off]
with [Control Panel] - [Power Options] - [Advanced], if you slide the power switch
for more than four seconds and do not release it, a second "beep*" will sound
and the power will be turned off forcibly. Data not previously saved will be lost.
Windows XP
Even when [When I press the power button on my computer] is set to [Shut
down] with [Control Panel] - [Performance and Maintenance] - [Power Options] -
[Advanced], if you slide the power switch for more than four seconds and do not
release it, a second "beep" will sound and the power will be turned off forcibly.
Data not previously saved will be lost.
* When the speaker function is disabled, e.g., by the key combination Fn + F4 , there will
be no beep sound.
Slide the power switch; at the "beep*"
sound, release your finger.
18
Standby Mode
or
Hibernation Mode