Security Measures - Panasonic CF-M34 Series Reference Manual

Security Measures

To prevent unauthorized access of your computer, the various security measures are provided below.
Situation
You do not want your computer to be used without permission
You do not want the data on the hard disk to be read, or data to
be written to the hard disk, in cases including theft.
You want to prevent theft of your computer
NOTE
Windows has a security function that differs from the above security measures. For detailed information, refer to
the Windows help.
When you do not want your computer to be used without permission
You should set your "Supervisor Password" and "User Password" (The User Password
can only be set when the Supervisor Password has been set).
Without the password, access to your computer is impossible.
Starting up when the password is set
(When [Password on boot] of the [Security] menu is set to [Enable].)
Enter your password* and press Enter .
Enter Password [
*
Supervisor Password or User Password set in the Setup Utility (not the
Windows password).
When the Setup Utility is started up with Supervisor Password
You can access all items of the Setup Utility (
When the Setup Utility is started up with User Password
You can not register [Advanced] and [Boot] menu.
The User password can be changed only when [User Password Protection] has
been set to [No Protection]. The User Password cannot be deleted.
F9 does not work.
NOTE
When [Password on boot] in the Setup Utility is set to [Disable], the password is not
necessary when the computer is started up, but the password becomes necessary
when the Setup Utility is started up. This alternative makes it possible to prevent the
contents of the Setup Utility from being changed.
Function to use
Supervisor Password
User Password
Hard Disk Lock
Security lock
The correct password
]
Three incorrect attempts
or
No password for about a minute
page
Reference
below
page 23
"Names and Functions of
Parts"
Will Start
Will Not Start
(Power off)
45).
20