Using The Power Switch - Panasonic CF-07 Series Reference Manual

Hide thumbs Also See for CF-07 Series:

Table of Contents

Standby/Hibernation Functions

Using the Power Switch

Setting

Select [Start] - [Control Panel] - [Performance and Maintenance] - [Power Op-

tions] - [Advanced].

Select [Stand by] or [Hibernate] for [When I press the power button on my com-

puter], then select [OK].

Shutting down

Press the power switch; at the "beep" sound, release

your finger

The computer will enter either the standby or hibernation mode,

depending on the setting.

When [PC in standby] is displayed on the wireless display, select

[OK]. The wireless display will power off.

CAUTION

After releasing your finger from the power switch, do not touch the power switch

until the power indicator goes off or blinks.

At the "beep" sound, release your finger from the power switch. If you continue

to press down on the switch and hold it for more than four seconds, the unit will

emit a second "beep" then power off. Data not previously saved will be lost.

Even when [When I press the power button on my computer] is set to [Shut

down] with [Start] - [Control Panel] - [Performance and Maintenance] - [Power

Options] - [Advanced], if you press the power switch for more than four sec-

onds and do not release it, a second "beep" will sound and the computer will

be turned off forcibly. Data not previously saved will be lost.

Table of Contents