IBM Netfinity 7100 User's Reference Manual page 48

34
IBM® Netfinity® 7100 User's Reference
Follow these steps to continue configuring the system:
a. Enter a System Name.
Enter a name for the system in the System Name field. This name will help
other Netfinity Manager users identify the system on the network.
b. Select a Network Driver.
Select one of the available Network Drivers that are displayed in the Network
Drivers field. Once selected, the Network Driver will assign a network
address to the system.
Notes:
(1) The fields that appear beneath the Driver Enabled check box will change
depending on which Network Driver you select.
(2) When enabling the IPX or TCP/IP Network Driver, the network address
cannot be altered, and it will not appear on the screen. No field will
appear beneath the Driver Enabled check box if you select the IPX or
TCP/IP Network Driver.
(3) When enabling the NetBIOS Network Driver, a network address will be
selected and displayed in the Network Address field. To change this
default name, enter any 1–8 character address. However, this address
must be unique to the system. If this NetBIOS address is identical to the
NetBIOS address of another system on the network, it will prevent
Netfinity Manager from starting properly.
(4) When enabling the Serial Netfinity Manager driver, type a name that will
be used to identify the system in the Unique Machine Dialup Name
field. This name can be up to 32 characters long, and must be unique to
the system. If this name is not unique, it can prevent remote Netfinity
Manager users from using the Serial Connection Control service to access
the system.
c. Enable the Network Driver.