IBM Netfinity 7100 User's Reference Manual page 134

POST message
00180700 xxxxyyyy Planar PCI device does not respond. (Where xxxx is the PCI vendor ID and yyyy is the
PCI device ID.)
Action:
If you cannot isolate and correct the problem, call for service.
00180800 An unsupported PCI device is installed.
Action:
If the problem persists, call for service.
00181000 PCI error.
Action:
If the problem persists, call for service.
01295085 The ECC checking hardware test failed.
Action:
01298001 No update data is available for processor 1.
Action:
01298002 No update data is available for processor 2.
Action:
01298003 No update data is available for processor 3.
Action:
01298004 No update data is available for processor 4.
Action:
01298101 The update data for processor 1 is incorrect.
Action:
01298102 The update data for processor 2 is incorrect.
Action:
01298103 The update data for processor 3 is incorrect.
Action:
01298104 The update data for processor 4 is incorrect.
Action:
01298200 Microprocessor speed mismatch
Action:
Table 16. POST error messages
120
IBM® Netfinity® 7100 User's Reference
Remove the PCI adapters. If you can start the server without the adapters, reinstall
each adapter one at a time and retest after each is reinstalled. When an adapter fails,
replace it.
Remove the PCI adapters. If you can start the server without the adapters, reinstall
each adapter one at a time and retest after each is reinstalled. When an adapter fails,
replace it.
Remove the PCI adapters. If you can start the server without the adapters, reinstall
each adapter one at a time and retest after each is reinstalled. When an adapter fails,
replace it.
Call for service.
Update the system BIOS to a level that supports the microprocessors installed in the
server.
Update the system BIOS to a level that supports the microprocessors installed in the
server.
Update the system BIOS to a level that supports the microprocessors installed in the
server.
Update the system BIOS to a level that supports the microprocessors installed in the
server.
Update the system BIOS to a level that supports the microprocessors installed in the
server.
Update the system BIOS to a level that supports the microprocessors installed in the
server.
Update the system BIOS to a level that supports the microprocessors installed in the
server.
Update the system BIOS to a level that supports the microprocessors installed in the
server.
The microprocessors installed do not run at the same speed; install microprocessors
with identical speeds.
Description