IBM Netfinity 7100 User's Reference Manual page 143

Code Function
201 System Failed
memory
202 System cache Aborted
Failed
Warning
Result
DIMM in location DIMMn
(where n is the number of the socket that
contains the failing DIMM)
Test setup error: Corrupt BIOS in ROM
Test setup error: Corrupt DMI BIOS, information
in BIOS is not as expected
Test setup error: BIOS cannot access VPD
information
Test setup error: Corrupt DMI BIOS. Information
in BIOS is not as expected
Test setup error: No L2 cache detected on
microprocessor socket id xyz or BIOS setup
problem
(where xyz identifies the microprocessor that is
causing the error message)
Test setup error: Unknown hardware problem
associated with microprocessor in socket id xyz.
(where xyz identifies the microprocessor that is
causing the error message)
Microprocessor in socket ID xyz
(where xyz identifies the microprocessor that is
causing the error message)
Note: The indicated microprocessor LED will be
on.
Test setup error: Cache is disabled. Use system
setup to enable before retrying the test
Text message Action
1. Reseat the failing
DIMM.
2. If the problem
remains, replace
the DIMM.
If the problem
persists, call for
service.
If your server does not
have the latest level
BIOS installed, update
the BIOS to the latest
level.
If the problem persists,
call for service.
If your server does not
have the latest level
BIOS installed, update
the BIOS to the latest
level and run the
diagnostic program
again.
If the problem persists,
call for service.
1. If your server
does not have the
latest level BIOS
installed, update
the BIOS to the
latest level
2. Run the
diagnostic
program again.
3. If the problem
remains, replace
the failing
processor.
If the problem persists,
call for service.
1. Reseat the
identified
microprocessor.
2. If the problem
remains, replace
the
microprocessor.
If the problem persists,
call for service.
Use the Cache
Control choice from
the Advanced Setup
menu to enable the
cache.
If the problem persists,
call for service.
Chapter 7. Solving problems
129