Ecm (Electronic Copy Monitor) Setting [3] - Konica Minolta 2230 User Manual

Key Operator Mode
Setting options: User Set or Preset ratio
1 While pressing [OK], turn power ON. Enter the key operator password, then press [OK].
2 Press [F1 ( )] and [F2 ( )] to display " 2: Preset/user set ratio(s)", and press [OK]. The
Preset/user set ratio(s) setting screen will be displayed.
3 Press [F2 (USER SET)] to select USER SET 1, 2 or 3.
Enter a ratio from 50%~200%, using the keypad.
If a ratio under 50 is entered, 50% will be displayed.
Key operator mode screen
If a ratio over 200 is entered, 200% will be displayed.
4 Press [OK] to complete the setting.
5 If no further changes are required, proceed to step 7.
6 If other initial setting changes are required, press [F4 (PREV)] to return to the Key
operator mode screen.
7 Turn power OFF.
8 Turn the copier power switch back ON to perform copying operations.
NOTE: The Preset ratios are initially set to be unavailable for the user to change. Please contact your service representative, if
required.

ECM (Electronic Copy Monitor) Setting [3]

This function can only be accessed by the key operator after a unique ECM master key code is
entered. The Electronic Copy Monitor allows you to monitor all copying activity by controlling
password accounts.
9-12 Key Operator Mode
Preset/user set ratio(s) setting screen