Konica Minolta 2230 User Manual page 73

Output Modes
ST-103/ST-216 Off-Line Stapler (continued)
Corner Stapling
1 Press the stapler release button to open the stapler unit.
2 Remove the corner stapling adaptor device from the location shown.
3 Partially close stapler and insert the stapling adaptor into the slot indicated.
NOTE: When inserting the adaptor do not close stapler completely.
4 When adaptor is inserted, close stapler.
5 Insert upper left corner of paper into stapler. The copied set will be stapled.
Removing Corner Stapler Adaptor
1 Hold each side of the Corner Stapling Adaptor, lift slightly, then withdraw.
2 Press the stapler release button, and open the stapler unit.
3 Return the Corner Stapler Adaptor to its original position, then close the stapler.
6-14 Output Modes