Mechanical Installation - Datalogic DS6400 Quick Reference Manual

DS6400 QUICK GUIDE

MECHANICAL INSTALLATION

The DS6400 reader can be positioned and installed in the best way possible as a result of the patented Step-A-
TM
Head feature. Thanks to the separation between Head and Base, you can modify the orientation of the decoder
base, and therefore display-keypad and connector panels, while keeping the optic head in the correct reading
position. The reading head and the decoder base can be rotated independently from each other allowing the
installation even in the most critical locations.
To rotate the head follow the given procedure:
1. detach the head from the base by unscrewing the four fixing screws;
2. rotate the head in the desired position;
3. loosen but don't remove the two screws on top of the head;
4. affix the head onto the base carefully aligning the four fixing screws and
progressively tightening them about half-way;
5. completely tighten the two screws on top of the head;
6. completely tighten the four fixing screws.
The following diagrams give the overall dimensions of the reader standard model, oscillating mirror model and
mounting bracket. They may be used for their installation:
76
2.99
DS6400 Overall Dimensions
69
2.72
2.20
DS6400 Oscillating Mirror Model Overall Dimensions
14
16.5
0.65
85
3.34
110
4.33
85
16.5
3.35 0.65
56 114
4.48
inch
180
7.08
=
mm
inch
ST-237 Mounting Bracket Overall Dimensions
11
0.43
14
0.55
mm
R22
ST-210 Mounting Bracket Overall Dimensions
Head Screws
Step-A-Head™ Feature
42
1.65
10
0.4
22
0.86
= =
50
1.96
72 =
2.83
100
3.93
42
1.65
10
22
0.4
0.86
Ø4.1
0.16
11
50
1.96 0.43
72
14
2.83 0.55
100
3.93
R36
Fixing
Screw (4)
4
0.15
106°
73.2
2.88
mm
inch
4
0.15
R1
R5
mm
inch