3.
Click [SAVE].
・
"[Email] Set t i ng has been saved." is d isplayed, the
entered Email address is set, and you are returned to the
Administrator Settings window.
MEMO
•
Setting operations are canceled if you click [CANCEL], and
you are returned to the Administrator Settings window.
•
All settings are returned to their defaults if you press the IP
Video Intercom Adaptor default setting switch for 5 seconds
or more.
2-3-4 Sensor input / Option output Settings
In Sensor input / Option output Settings, you can set the
Sensor input detection method, and select the Option output
signal output duration. Sensor input detects the N.C. contact
input for "N.C." and detects the N.O. contact input for
"N.O.". The default settings are - Sensor input: "N.O.", and
Option output: "3 seconds".
MEMO
If you are logged in as a User, you cannot make Sensor input
•
/ Option output settings.
1.
Click the [Setting] button of "Sensor IN / Option OUT"
from the Administrator Settings window.
・
The Sensor IN / Option OUT Setting window is displayed.
21
IP Video Intercom Adaptor Settings