INTRODUCTION
Expanded Window
The following explains the various buttons in the Expanded Window and the display contents.
The content on the left-hand side of the window is the same as the Standard Window.
[Adaptor] display
Displays the Adaptor name
If no name is set, the MAC Address is displayed
[No] display
Displays the Adaptor number
Selects the Adaptor
[ (q p) ] buttons
Changes the order of Adaptor
display
MEMO
•
You can select the corresponding Adaptor by clicking the line for the optional Adaptor.
Clear the selection by clicking the selected Adaptor again.
•
Status display cannot indicate the usage status of other PC Applications.
•
To delete an Adaptor, move the mouse's pointer to the Adaptor you want to delete in the
"disconnected" status, right-click, and then select "Delete".
14
[Status] display
Displays the Adaptor status
Color
Comment
Displayed when there is a
Red
1 CALL DOOR
call from the door station
Displayed during
Green COMMUNICATION
communication
Green MONITOR
Displayed during monitoring
Displayed when there is
Orange 1 CALL ROOM ST
a call from the master
monitor station
Displayed when there is a
Orange CALL
call from the PC Application
Encryption key not acquired
Gray <No display>
(During standby)
Blue <No display>
Displayed during standby
[Standard window] button
Switches to the Standard
Window
[Sensor] display
Displays the status of
incoming signals from
option unit(s)
P.47
[SETTINGS] button
Opens the settings window
for the Adaptor
P.17
Description
P.13