0410 JKW-IP IP Video Entry System QuikStart Guide This is an abbreviated instruction manual for installation purposes.
GENERAL DESCRIPTION AND WIRING The JKW-IP and software combine to create a network door entry video intercom system. The JKW-IP adaptor is an addition to a single door, single master JK boxed set and allows up to 20 sets to be connected to up to 10 computers. The system allows for call-in to the PC via the JKW-IP software, two way audio and one way video communication between the door station and the PC, as well as the ability to activate a door or gate release mechanism.
BASIC OPERATIONS AND TERMINOLOGY Figure 1: JKW-IP Program window The most important features of the JKW-IP Program window are: (See Operations on pages 6 & 7 for details) The [PC Setting] button (below OFF button), with PC specific volume level controls, configuring basic program responses to events and enables automatic recording of video and audio.
Step 2: Configure each adaptor. Using a computer and an unmanaged switch, log in to each adaptor one at a time using a web browser pointed to Alert messages, then use the default Admin ID “aiphone” and Password “aiphone”. In the Admin tab do the following (See Figure 2, below “Web Interface, Admin tab”)
In the JKW-IP program’s window, right click the adaptor in the Adaptor display and choose the Encryption Key option from the drop down menu (see Figure 1 on page 3 “Aiphone JKW-IP”). Click the [……] button and navigate to the location saved in step “d”...
OPERATIONS The JKW-IP software has the following operations: Answering a call from the door station, Door release and camera controls Option Output from JKW-IP hardware adaptor Computer to JK-1MD/1MED Master communication Door station monitoring Sensor Detection from Connected Equipment Recording and Playback of A/V from a door station. Answering a call from the door station When the call button on a JK door station is pressed, the following occurs: (See Figure 1 on page 3 “JKW-IP Software...
OPERATIONS (continued) Computer to Master communication The JKW-IP software and the physical JK-1MD/JK-1MED master stations can communicate via an intercom feature, also called Room to Room calling or Computer to Master calling. The following occurs when receiving a call The call tone sounds, no image is displayed (the camera door station is not involved). The status icon in the Status display will change to an orange square and a message will read “1 CALL ROOM ST”.
(User tab) Email Setting Aiphone warrants its products to be free from defects in material and workmanship under normal use and service for a period of one year after delivery to the ultimate user. We will repair free of charge or replace at no charge Aiphone product, that upon examination by an Aiphone Repair Technician is proven defective and under warranty.