IP Video Intercom Adaptor Settings
Video Setting
Select the Frame Rate from "1fps", "5fps", "10fps", and
"15fps", and select the Quality from "1 (Low)" to "10 (High)".
The default settings are - Frame Rate: "15fps", and Quality:
"10 (High)".
1.
Click the drop-down menu buttons from Video Setting
for "Frame Rate" and "Quality", and make the settings.
2.
Click [SAVE].
・
"[Network] Setting has been saved." is displayed, and the
Reboot Confirmation dialog is displayed.
MEMO
•
Setting operations are canceled if you click [CANCEL], and
you are returned to the Administrator Settings window.
3.
Click [OK].
・
[System is initializing. Please wait for a while. Elapsed
Time XX second.] is displayed, and the IP Video Intercom
Adaptor is rebooted. It takes about 100 seconds to reboot.
・
The STATUS indicator blinks. When the STATUS indicator
changes to lit, rebooting is complete.
・
You can also reboot with the [Reboot] button.
MEMO
•
All settings are returned to their defaults if you press the IP
Video Intercom Adaptor default setting switch for 5 seconds
or more.
Raising the Frame Rate from 1fps to 15fps gives you a
•
smoother image quality. Also, raising the Quality from 1 to
10 gives you a finer image. However, raising both Frame Rate
and Quality may place a heavy load on the network.
26