Aiphone JKW-IP Operation Manual page 24

IP Video Intercom Adaptor Settings
Connection Port, Audio Port, Video Port, and Web Port Settings
You can change the settings for Connection Port, Audio
Port, Video Port, and Web Port numbers. The default setting
numbers are - Connection Port: "5060", Audio Port: "65002",
Video Port: "65202", and Web Port: "443".
1.
Enter the "Connection Port" number, "Audio Port"
number, "Video Port" number, and "Web Port" number.
・
For Global, if it cannot be automatically set with UPnP,
select UPnP OFF and, after setting the router, enter the
WAN / Global IP Address.
・
For Global, it may be necessary to change ports when
you are using multiple IP Video Intercom Adaptors or PC
Applications. Please check our homepage at http://www.
aiphone.net for more details.
・
For the router setting information, see the Operation Manual
supplied with the router.
2.
Click [SAVE].
・
"[Network] Setting has been saved." is displayed, and the
Reboot Confirmation dialog is displayed.
MEMO
• Setting operations are canceled if you click [CANCEL], and
you are returned to the Administrator Settings window.
3.
Click [OK].
・
[System is initializing. Please wait for a while. Elapsed
Time XX second.] is displayed, and the IP Video Intercom
Adaptor is rebooted. It takes about 100 seconds to reboot.
・
The STATUS indicator blinks. When the STATUS indicator
changes to lit, rebooting is complete.
・
You can also reboot with the [Reboot] button.
MEMO
All settings are returned to their defaults if you press the IP
•
Video Intercom Adaptor default setting switch for 5 seconds
or more.
Update Encryption Key File
You can update the Encryption Key File.
1.
Click [UPDATE].
・
The Update Encryption Key File Confirmation dialog is
displayed.
2.
Click [OK].
・
"The encryption key file was updated." is displayed.
3.
Click [SAVE].
・
"[Network] Setting has been saved." is displayed, and the
Reboot Confirmation dialog is displayed.
MEMO
Setting operations are canceled if you click [CANCEL], and
•
you are returned to the Administrator Settings window.
4.
Click [OK].
・
[System is initializing. Please wait for a while. Elapsed
Time XX second.] is displayed, and the IP Video Intercom
Adaptor is rebooted. It takes about 100 seconds to reboot.
・
The STATUS indicator blinks. When the STATUS indicator
changes to lit, rebooting is complete.
・
You can also reboot with the [Reboot] button.
MEMO
• All settings are returned to their defaults if you press the IP Video
Intercom Adaptor default setting switch for 5 seconds or more.
After updating the Encryption Key File, it is necessary to re-
•
obtain the Encryption Key and make settings in all the PC
Applications. See "Downloading Encryption Key"
more details.
24
P.32 for