Logging In - Aiphone JKW-IP Operation Manual

2-2 Logging in

To modify IP Video Intercom Adaptor settings, you first
need to login.
MEMO
• Since you are not registered as a User before setting up, you
can only login as the Administrator.
You can login as the "Administrator" or a "User". Setting
items are restricted depending on which you use to login.
Login using the following method.
1.
Start up the PC Application, and select an optional
"Adaptor" from the Expanded Window.
2.
Click [SETTINGS].
MEMO
• If the security warning and virus check program warning
screens are displayed during start up, please approve them.
・
Login is complete, and the User Settings window is
displayed.
・
Administrator / User are differentiated by the ID entered.
MEMO
If the "Status" display is not displayed, the IP Video Intercom
•
Adaptor is not "connected". Select the relevant IP Video
Intercom Adaptor, right-click, and then select "Connect"
from the menu displayed to connect the IP Video Intercom
Adaptor.
• If the check mark has been removed from "Remember above
information" in the Adaptor Registration window, you need
to enter the registration information again. See "Registering
the IP Video Intercom Adaptor"
If no operations are performed for a set amount of time,
•
a timeout is automatically generated. When an operation
is performed, the message "The session has been expired.
Please login." is displayed. Please login again.
If the wrong Password is entered for a registered IP Video
•
Intercom Adaptor, you need to enter the ID and Password.
17
IP Video Intercom Adaptor Settings
Administrator User
P.15 for more details.