D-Link i2eye DVC-1000 Manual page 12

Using the Setup Wizard (continued)
DNS (Domain Naming System) Screen
If you entered an IP address in
the Network Address screen
(described on the previous
page) you will see the screen
for setting DNS server
addresses. The DNS screen
asks for information regarding
the Domain Name System
(DNS) server.
You should be able to get both
of these settings from your
router configuration settings, ISP or your network administrator. Only the primary
DNS server address is required, though it is best to have both the primary and
secondary addresses.
Press Next to continue.
The Domain Name System (DNS) translates Internet domain names
(for example www.dlink.com, which is easy for humans to use and
remember) to IP addresses, which are what computers use to find
each other on the Internet.
Network Speed Screen
The Network Speed screen
asks you to select the type of
broadband Internet connection
you use. Each choice has de-
fault send and receive speeds
defined for you. If you need to
change these settings after
completing the Setup Wizard,
this can be done by selecting
the Settings > Network >
Speed screen.
Press Next to continue.
12