Honeywell Lynx Touch L5200 Programming Manual page 11

Screen Display
Secondary CS Info
Phone Type
None
Communicator Type
None
Phone Number
Account Number
FFFF
Dynamic Priority
None
Dynamic Delay
None
Report All
Press to Report All
Report Alarms
Enabled
Report Troubles
Enabled
Report Open/Close
Disabled
Report Tests
Enabled
Follow Me Phone 1
Secondary Central Station Information
Phone Type
Communicator Type
Phone Type
None
Contact Id: 4 Digit
Contact Id: 10 Digit
SIA
Note: If SIA, Contact Id: 4 Digit or Contact Id: 10 Digit is selected, the Phone Number and Account
Number options will be displayed.
Communicator Type
None
GSM
WiFi
WiFi & GSM
IP
Note: If IP is selected the Dynamic Priority option will be displayed.
Phone Number
Enter the Secondary Central Station Phone Number (Up to 20 digits)
Account Number
Enter the Secondary Central Station Account Number
Dynamic Priority
Redundant Reports
Preferred Telco
Preferred Radio
Note: If Preferred Telco or Preferred Radio is selected the Dynamic Delay option will be displayed.
Dynamic Delay
None
15 Seconds
30 Seconds
60 Seconds
90 Seconds
Report All
Press to Report All
Report All Set
Report Alarms
Disabled
Enabled
Report Troubles
Disabled
Enabled
Report Open/Close
Disabled
Enabled
Report Tests
Always Enabled (not selectable)
Follow Me Phone 1 (This feature is not available on the LYNX Touch L7000)
Choose from the following options:
Phone Type
Report All
Report Troubles
Report Tests
Function & Programming Options
Phone Number
Report Alarms
Report Open/Close
- 11 -