Program The Z-Wave Module - Honeywell Lynx Touch L5200 Programming Manual

Screen Display
Lack of Usage Notify
Disabled
Power-Up in Previous
Yes
Display Alarm Cancel
Yes
Display Exit Time
Yes
Cross Zone Delay
None
Cross Zone 1
Disabled
Cross Zone 2
Disabled

Program the Z-Wave Module

Z - Wave
5100-100-067-V0
Z-Wave
Enabled-Installed Telephone
Temperature Display
Fahrenheit
Lack of Usage Notify
Disabled
1 Day
7 Days
27 Days
90 Days
180 Days
365 Days
Power-Up in Previous State
Always Enabled (not selectable)
Display Alarm Cancel
Yes
No
Display Exit Time
Yes
No
Cross Zone Delay
None
30 Seconds
1 Minute
90 Seconds
2 Minutes
3 Minutes
4 Minutes
Cross Zone 1
Disabled
Cross Zone 2
Disabled
Z-Wave
Note: This procedure must be completed any time that the panel has been defaulted or
updated.
Z-Wave
Select from the following options:
Enabled – Installed Telephone Side
Disabled
Temperature Display
Select from the following options:
Fahrenheit
Celsius
Function & Programming Options
- 17 -