Program Communications - Honeywell Lynx Touch L5200 Programming Manual

Screen Display
End Week
First

Program Communications

Communicator
5000-100-132-V0
Communications Path
None
APL
Disabled
City ID
CS ID
Sub ID
Supervision
24 Hours
Old Alarm Time
10 Minutes
Remote Acc. Comm.
Disabled
Multi Mode Comm.
Disabled
GSM Fault Time (min)
00
Function & Programming Options
Start Week
First
Second
Third
Fourth
Last
Next to Last
3rd from Last
Communicator
Program the following options:
Communications Path
City ID
Supervision
Remote Acc. Comm.
GSM Fault Time OR
IP Fault Time
Communications Path
None
IP
GSM
WiFi
WiFi & GSM
Advanced Protection Logic
Enabled
Disabled
Primary City Identification
Enter 2 digits
01-99
Primary Central Station Identification
Enter 2-digits (HEX)
01-FE
Primary Subscriber Identification
Enter 4-digits
0001-9999
Supervision
24 Hours
None
30 Days
Old Alarm Time
10 Minutes 15 Minutes
30 Minutes 1 Hour
2 Hours 4 Hours
8 Hours 12 Hours
24 Hours
Remote Access Communication
Disabled
Enabled
Note: If enabled the following option will be active.
Multi Mode Communication
Disabled
Relay Reports
Enhanced Reports
GSM Fault Time (min) (displayed if GSM is selected as Communications Path)
Enter 2-digits
00-99
APL
CS ID Sub ID
Old Alarm Time
Multi Mode Comm.
- 6 -