Using the Basic Cradle
Serial Connection of Multiple Basic Cradles
You can use optional 6-6 pin Modular Cables (DT-788RSC) to
connect up to 16 Basic Cradles in a serial configuration.
This configuration makes it possible to exchange data
between multiple Handheld Terminals and a
personal computer.
Connections
First connect Basic Cradle RS-
485-1 and then the RS- 485-2 of
the Basic Cradle that you want to
connect to.
DIP Switch Settings
The following table shows the various
settings that are available with the DIP
switches located on the back of the Basic Cradle.
RS-232C Control Signal Setting
RS enabled
ER enabled
Important!
E-46
1 2 3 4 5 6 7 8
4
should not be used.
Handheld Terminal - Basic Cradle
Communication Speed
Connection Type
Host Computer
Connection
5
Cable (DT-788RSC)
1