nokia
C
P
ONNECTING
EOPLE
CMO Operations & Logistics
CMO OL WW Service Solutions & Development
Bochum / Germany
9. DISASSEMBLY INSTRUCTIONS
1.) Push down the Release Button before pulling the
Battery Cover.
3.) The Backplate is attached to the Hinge Spring with
two adhesive tapes.
To avoid the snaps from breaking it
is important that the Backplate is at first lifted on the
right side referring to the "NOKIA" logo.
5.) A-Face Assy is attached with snaps to the B-Cover
Lower Block. Release the two snaps first.
7.) Fold the A-Face Assy as shown.
Service Manual 2650/2651 Level 1&2
PAGE 12 (24)
CONFIDENTIAL
2.) Open the unit and protect the Window with a film.
4.) Now, remove the Backplate Adhesive. If necessary
clean the Backplate and the Hinge Spring before
attaching using new Backplate Adhesives.
6.) Shift the A-Face Assy from the B-Cover as shown.
8.) Remove the A-Face Assy from the B-Cover Upper
Block carefully.
Copyright © 2004-2005 Nokia Corporation. All rights reserved.
Approved 3.0
MGR
10.2.2005