Domesheet Exchange Instructions - Nokia 2650 Service Manual

nokia
C P
ONNECTING EOPLE
CMO Operations & Logistics
CMO OL WW Service Solutions & Development
Bochum / Germany

10. DOMESHEET EXCHANGE INSTRUCTIONS

1.) Take care not to damage the LED's when exchanging
the Domesheet. Start with SRT-6 as shown in the
picture.
3.) Take the new Domesheet with tweezers.
5.) Place the Domesheet straps into the slot of the Key
Dome Shield.
7.) Make sure that the edges and the screw holes of
Domesheet and the Key Dome Shield (C-1Cover) are
congruent to each other.
Service Manual 2650/2651 Level 1&2
PAGE 17 (24)
CONFIDENTIAL
2.) Tweezers can be used to remove the defective
Domesheet.
4.) Place the Domesheet in the Key Dome Shield (C-
1Cover).
6.) Same procedure on the opposite side.
8.) Place the Key Dome Shield (C-1Cover) with the
Domesheet on the Engine Module exactly and press-on
the Domesheet carefully. Check if the Domesheet is
correctly stuck to the Engine Module.
Copyright © 2004-2005 Nokia Corporation. All rights reserved.
Approved 3.0
MGR
10.2.2005