Clarion FB275BT Owner's Manual page 28

Common Operations
• Selecting microphone input
1. Select "MIC".
2. Turn the
[~/II·
ENT] knob to select one of
the following:
-INTERNAL: Built-in microphone will be used.
- EXTERNAL: An external microphone will be
used.
Note:
- The factory default setting is "INTERNAL".
System Menu
1.
Press and hold
[~]
and [ ..... ] buttons si-
multaneously for 1.5 seconds or longer.
2. Press the [ ..... ,
~
] button to select an item.
["VERSION"
e
"FACT. RST"
J
3. Press the
[~]
button to exit the menu.
• Checking the unit version
2-1. Select "VERSION".
• Restoring to factory default setting
This function allows user to restore the unit to the
factory default setting.
2-1. Select "FACT. RST".
2-2. Push the
[~/II
• ENT] knob. A reset con-
firmation is prompted.
2-3.
Turnthe[~/II·
ENT] knob to select "YES"
or "NO".
2-4. Push the
[~/II
• ENT] knob to confirm the
selection.
Notes:
- All pairing information and preset memories will be
cleared. User will have to manually perform those
setting again.
- Once reset, system will automatically turn off and
re-power on.
- Clock time will not be reset with this operation.
The clock time reset is done with the following
steps.
1. Turn off the power.
2. Press the [RELEASE] button and remove the
DCP.
3. Press the reset button with a thin rod.
~Reset
button
)
28
FB275BT I FB275BTB
Common Operations
• Selecting microphone input
1. Select "MIC".
2. Turn the
[~/II·
ENT] knob to select one of
the following:
-INTERNAL: Built-in microphone will be used.
- EXTERNAL: An external microphone will be
used.
Note:
- The factory default setting is "INTERNAL".
System Menu
1.
Press and hold
[~]
and [ ..... ] buttons si-
multaneously for 1.5 seconds or longer.
2. Press the [ ..... ,
~
] button to select an item.
["VERSION"
e
"FACT. RST"
J
3. Press the
[~]
button to exit the menu.
• Checking the unit version
2-1. Select "VERSION".
• Restoring to factory default setting
This function allows user to restore the unit to the
factory default setting.
2-1. Select "FACT. RST".
2-2. Push the
[~/II
• ENT] knob. A reset con-
firmation is prompted.
2-3.
Turnthe[~/II·
ENT] knob to select "YES"
or "NO".
2-4. Push the
[~/II
• ENT] knob to confirm the
selection.
Notes:
- All pairing information and preset memories will be
cleared. User will have to manually perform those
setting again.
- Once reset, system will automatically turn off and
re-power on.
- Clock time will not be reset with this operation.
The clock time reset is done with the following
steps.
1. Turn off the power.
2. Press the [RELEASE] button and remove the
DCP.
3. Press the reset button with a thin rod.
~Reset
button
)
28
FB275BT I FB275BTB