Assicurarsi di passare alla pagina 2 per leggere le informazioni relative ai Controlli. Vouw pagina 2 open om de pagina over de bediening te lezen. Var noga med att veckla ut sidan 2 för att läsa sidan med information om kontrollerna. Denetimler Sayfasını okumak için katlanmış sayfa 2'yi açtığınızdan emin olun. FZ102E...
El botón [TA](Información de tráfico) está desactivado en los modelos que no son RDS. Huomautus: [TA]-painike ei ole käytössä muissa kuin RDS-malleissa. Obs! [TA]-knappen är avaktiverad för icke RDS-modeller. Not: RDS olmayan model için [TA] düğmesi devre dışı bırakılır. FZ102E...
MODEL. PLEASE CHECK WITH YOUR SERVICE DEALER FOR THE CORRECT POWER SUPPLY IN THIS UNIT. INCORRECT POWER SUPPLY USAGE MAY RESULT THE EQUIPMENT PERMANENT UNUSABLE AND VOID THE WARRANTY. INFORMATION FOR USERS: CHANGES OR MODIFICATIONS TO THIS PRODUCT NOT APPROVED BY THE MANUFACTURER WILL VOID THE WARRANTY. FZ102E...
The loudness effect will depend on volume level. Radio Radio.. Adjusting The Audio Adjusting The Volume Adjust with the [ ] rotary knob. Range Default settings 0 to 33 FZ102E...
RDS interrupt does not function during AM radio reception. When set receives RDS signal, and can read PS data, PS appears in the display. CAUTION For some countries, RDS (Radio Data System) broadcasting is not supported. It is recommended to turn off all the RDS settings. FZ102E...
Page 7
Emergency broadcasting Emergency broadcast If an emergency broadcast is received, all the function mode operations are stopped. “ALARM” appears in the display and the emer- gency broadcast can be heard. Cancelling an emergency broadcast Press the [TA] button during interrupts. FZ102E...
“USB Mass Storage Class” Notes: standards. Please note that iPod device and Content protected audio file (DRM – Digital Rights hard disk drive (HDD) are not supported. Management) is not supported. Filesize less than 12KB will not be supported. FZ102E...
Page 9
TAG ver 1 will be decoded. UNICODE ID3 (Chinese, Japanese and etc) is not supported. Only ASCII characters can be displayed in Tags If ID3 TAG has Japanese, Chinese character or other non supported characters, “ ” will be displayed as substitution. FZ102E...
Remove the USB memory device from the USB slot. Playback USB mode Push the [ ] rotary knob to select the USB mode. * Track will start to play or resume automatically. Note: If there is no USB memory device inserted, “NO USB” will be displayed. FZ102E...
This function plays all tracks of the current folder repeatedly. indicators light in the display. Random Random play Press the [RDM] button. Notes: This function plays all tracks of current folder in a random order. indicator lights in the display. FZ102E...
If the reception of the current broadcast station de- Cancelling a PTY interrupt broadcast teriorates, “SEARCH” appears in the display and the radio searches for the same programme on Press the [TA] button during the PTY interrupt another frequency. broadcast. FZ102E...
All settings and preset memory channels will be be received, the unit returns to the previous receiv- returned to initial stage. User will have to manually ing station. perform those settings again. Once reset, system will automatically turn off. FZ102E...
Insert the memory card to USB card reader be detected. connected to main unit first before connecting to the main unit. first before inserting memory card to the card reader. Error display is shown Refer to the when USB is plugged in. corresponding Error Display type. FZ102E...
USB ERR ling the USB device or data error. device is being used. Unplug the USB memory device and re-plug into slot. Note: Short circuit USB connector will power off the unit automatically. Replace with another USB memory device. FZ102E...
Continuous Average Power Output: out notice for further improvement. 15 W X 4, into 4 Ω, 20 Hz to 20 kHz,1%THD Bass Control Action ( 100 Hz ) : ±14 dB Treble Control Action ( 10 kHz ) : ±14 dB FZ102E...
Need help?
Do you have a question about the fz102e and is the answer not in the manual?
Questions and answers