Clarion FB275BT Owner's Manual page 21

• Call via voice dialing
2-1. Select "VOICEDIAL"
3-1. Press the [
r ]
button again to activate
voice dialing.
3-2. Speak the contact name clearly towards the
internal/external microphone to perform voice
dialing.
• Ending a call
This function allows you to end a call conversa-
tion directly from the car stereo.
1. Press the [
~
] button to end the call.
2. The display returns to previous mode.
Note:
• "CALL END" will be displayed when ending a
conversation.
Alternatively, you may also answer/reject/end the
call by using your phone's keypad. However, it
is recommended to always perform those opera-
tions from the main unit.
Making a call
There are few ways to make outgoing call.
If no phone is connected, the car stereo will not
be able to make an outgoing call. The car stereo
will try to reconnect to the last connected device if
Auto Connection is enabled in Adjustment mode.
This is dependent on mobile phones.
Please make sure your phone is connected with
the"
0"
indicator light is on.
There are 2 display icons at the top row of dis-
play when entering Telephone mode.
Ir." :
Call can be activated.
• : Call cannot be activated. Please connect
your phone.
1. Press the [ r ] button to enter Telephone
mode.
2. Press the [ ..... ,
~]
to select the following
"VOICEDIAL" ~ "LN REDIAL" ~
"MEMORY 1"
~
"MEMORY 2"
~
"MEMORY 3"
~"MEMORY
4"
~
"MEMORY 5"
~
"MEMORY 6"
3. Press the [
r ]
button again to perform outgo-
ing call.
Note:
• "Dialing" will be displayed when making a call.
Telephone numbers will be displayed if using the
preset telephone numbers dialing.
21
FB275BT/FB275BTB
• Answering a call
User can answer an incoming call directly from
the car stereo.
1. Press the [ r ] button to pick up an incoming
call.
2. The display switch to Telephone Interrupt mode.
Notes:
• During conversation,
",,".'11"
and call time elapsed
will be displayed.
• During an incoming call, some phones may auto-
matically pick up the call when it connects to this
unit.
• Rejecting a call
This function allows you to reject an incoming
call directly from the car stereo.
1. Press the [
~]
button to reject an incoming
call.
2. The display returns to previous mode.
Handsfree Operations
Incoming call
Whenever your car stereo is operating, the car
stereo is in standby mode awaiting the next call,
when an incoming call arrives the car stereo will
mute automatically and the ring tone is repro-
duced through your car's speaker.
The Car stereo will temporarily switch to Tele-
phone Interrupt mode and caller ID will be dis-
played in the car stereo.
Notes:
• Car stereo will be automatically set as default
speaker output everytime when there is an incom-
ing call.
• Some phones choose to present the audio despite
being told to route it to the car stereo. This duplica-
tion of audio is a device problem/feature but does
not impair functionality.
• During incoming call, caller ID and "Calling..." will
be displayed. Caller ID and CLIP (Calling Line
Identification Presentation) is dependent on mobile
phone and service provider. However, incoming call
with private telephone numbers (CLlR- Calling Line
Identification Restriction) will not be displayed.
• Deleting a digit
1. During Telephone Numbers Edit mode, turn the
[./11· ENT] knob to select a blank digit.
2. Push the [ ./11 . ENT] knob to delete cur-
rent digit.
Note:
• Digits on the right side (if there is any) will be shifted
to the left.
• Call via voice dialing
2-1. Select "VOICEDIAL"
3-1. Press the [
r ]
button again to activate
voice dialing.
3-2. Speak the contact name clearly towards the
internal/external microphone to perform voice
dialing.
• Ending a call
This function allows you to end a call conversa-
tion directly from the car stereo.
1. Press the [
~
] button to end the call.
2. The display returns to previous mode.
Note:
• "CALL END" will be displayed when ending a
conversation.
Alternatively, you may also answer/reject/end the
call by using your phone's keypad. However, it
is recommended to always perform those opera-
tions from the main unit.
Making a call
There are few ways to make outgoing call.
If no phone is connected, the car stereo will not
be able to make an outgoing call. The car stereo
will try to reconnect to the last connected device if
Auto Connection is enabled in Adjustment mode.
This is dependent on mobile phones.
Please make sure your phone is connected with
the"
0"
indicator light is on.
There are 2 display icons at the top row of dis-
play when entering Telephone mode.
Ir." :
Call can be activated.
• : Call cannot be activated. Please connect
your phone.
1. Press the [ r ] button to enter Telephone
mode.
2. Press the [ ..... ,
~]
to select the following
"VOICEDIAL" ~ "LN REDIAL" ~
"MEMORY 1"
~
"MEMORY 2"
~
"MEMORY 3"
~"MEMORY
4"
~
"MEMORY 5"
~
"MEMORY 6"
3. Press the [
r ]
button again to perform outgo-
ing call.
Note:
• "Dialing" will be displayed when making a call.
Telephone numbers will be displayed if using the
preset telephone numbers dialing.
21
FB275BT/FB275BTB
• Answering a call
User can answer an incoming call directly from
the car stereo.
1. Press the [ r ] button to pick up an incoming
call.
2. The display switch to Telephone Interrupt mode.
Notes:
• During conversation,
",,".'11"
and call time elapsed
will be displayed.
• During an incoming call, some phones may auto-
matically pick up the call when it connects to this
unit.
• Rejecting a call
This function allows you to reject an incoming
call directly from the car stereo.
1. Press the [
~]
button to reject an incoming
call.
2. The display returns to previous mode.
Handsfree Operations
Incoming call
Whenever your car stereo is operating, the car
stereo is in standby mode awaiting the next call,
when an incoming call arrives the car stereo will
mute automatically and the ring tone is repro-
duced through your car's speaker.
The Car stereo will temporarily switch to Tele-
phone Interrupt mode and caller ID will be dis-
played in the car stereo.
Notes:
• Car stereo will be automatically set as default
speaker output everytime when there is an incom-
ing call.
• Some phones choose to present the audio despite
being told to route it to the car stereo. This duplica-
tion of audio is a device problem/feature but does
not impair functionality.
• During incoming call, caller ID and "Calling..." will
be displayed. Caller ID and CLIP (Calling Line
Identification Presentation) is dependent on mobile
phone and service provider. However, incoming call
with private telephone numbers (CLlR- Calling Line
Identification Restriction) will not be displayed.
• Deleting a digit
1. During Telephone Numbers Edit mode, turn the
[./11· ENT] knob to select a blank digit.
2. Push the [ ./11 . ENT] knob to delete cur-
rent digit.
Note:
• Digits on the right side (if there is any) will be shifted
to the left.