Handsfree Operations - Clarion FB275BT Owner's Manual

Introduction to Bluetooth® Wireless
Technology
• Please refer chapter "Audio Streaming Opera-
tions" on page 23 for music streaming functional-
ity.
Please refer "Bluetooth@ adjustment" on page
26 for other Bluetooth® related adjustment.
Connecting Bluetooth® device
Your device/phone will normally connect auto-
matically to the unit after pairing. However, some
phones will not allow automatic connection to the
unit after pairing; please use the phone to manu-
ally connect to the unit.
If Automatic Connection is enabled in Adjustment
mode, the unit will try to connect to the previous-
ly connected phone when entering Telephone
mode or during power up. Connection can be
established at any Source mode. If connection
is unsuccessful, automatic connection will stop.
Please refer "Automatic connection" on page
27 to enable this feature.
The"
8) "
indicator will light on upon successful
connection.
Notes:
• Auto connection only works for HFP. User may need
to manually connect for A2DP. This will depends on
the Bluetooth® audio player.
• It is recommended to connect to mobile phone
(HFP) first before other A2DP device.
Disconnecting Bluetooth® device
1. Press and hold the [
~]
button for 1.5 sec-
onds or longer to disconnect all Bluetooth@
devices.
"CLO§lNG CONNECTIONS" will be displayed
and"
U "
indicator lights off.
Notes:
• Turning off the unit power and deleting any
Bluetooth@ device in Adjustment mode will also
disconnect the current device.
• Alternatively, user can use the phone to manually
disconnect the device. However some devices will
automatically reconnect once disconnect. Please
refer your device owner's manual for more de-
tails.
Please refer "Compatible Devices" on page 29
to make sure your device is compatible.
Handsfree Operations
Storing a preset telephone numbers
This function allows you to make direct call from
the unit. There are 6 preset telephone numbers
can be stored in the unit.
Please avoid performing this operation while
you are driving as you may lose your concen-
tration on the road. Always be sure to park
your vehicle and apply the parking brake in
order to perform this operation.
• Telephone numbers edit mode
1. Press the [ r ] button to enter Telephone
mode.
2. Press the [ ..... ,
~
] button to select
"MEMORY 1" to "MEMORY 6".
3. Push the
[~/II·
ENT] knob to edit the num-
bers. A blinking cursor on current digit will be
displayed.
4. Turn the
[~/II
. ENT] knob to select a num-
ber.
5. Push the [
~/II
• ENT] knob to go to next
number input.
6. Push the [
~/II·
ENT ] knob at a blank or
the last 16
th
digit (" ..... " indicator will be dis-
played) will store the numbers into memory.
Notes:
• "+"
can be allowed in the first digit only.
• Maximum digit range: 16 digits.
• Push and hold the
[~/II
. ENT] knob for 1.5
seconds or longer at a non-blank digit will store the
numbers into memory as well.
• Press the [
~
] button at anytime will cancel current
operation and exit the Edit mode without saving the
numbers. If no operation is performed for more than
10 seconds, the Edit mode is cancelled and returns
to the previous display.
• Clearing all digits
1. During Telephone Numbers Edit mode, turn the
[~/II·
ENT] knob to select a blank digit.
2. Push and hold the
[~/II
• ENT] knob for
1.5 seconds or longer to clear all digits on the
right side.
Note:
• Digits on the left side will remain as it is. In order to
clear all the digits, always select the first character
and perform the above operation.
20
FB275BT / FB275BTB
Introduction to Bluetooth® Wireless
Technology
• Please refer chapter "Audio Streaming Opera-
tions" on page 23 for music streaming functional-
ity.
Please refer "Bluetooth@ adjustment" on page
26 for other Bluetooth® related adjustment.
Connecting Bluetooth® device
Your device/phone will normally connect auto-
matically to the unit after pairing. However, some
phones will not allow automatic connection to the
unit after pairing; please use the phone to manu-
ally connect to the unit.
If Automatic Connection is enabled in Adjustment
mode, the unit will try to connect to the previous-
ly connected phone when entering Telephone
mode or during power up. Connection can be
established at any Source mode. If connection
is unsuccessful, automatic connection will stop.
Please refer "Automatic connection" on page
27 to enable this feature.
The"
8) "
indicator will light on upon successful
connection.
Notes:
• Auto connection only works for HFP. User may need
to manually connect for A2DP. This will depends on
the Bluetooth® audio player.
• It is recommended to connect to mobile phone
(HFP) first before other A2DP device.
Disconnecting Bluetooth® device
1. Press and hold the [
~]
button for 1.5 sec-
onds or longer to disconnect all Bluetooth@
devices.
"CLO§lNG CONNECTIONS" will be displayed
and"
U "
indicator lights off.
Notes:
• Turning off the unit power and deleting any
Bluetooth@ device in Adjustment mode will also
disconnect the current device.
• Alternatively, user can use the phone to manually
disconnect the device. However some devices will
automatically reconnect once disconnect. Please
refer your device owner's manual for more de-
tails.
Please refer "Compatible Devices" on page 29
to make sure your device is compatible.
Handsfree Operations
Storing a preset telephone numbers
This function allows you to make direct call from
the unit. There are 6 preset telephone numbers
can be stored in the unit.
Please avoid performing this operation while
you are driving as you may lose your concen-
tration on the road. Always be sure to park
your vehicle and apply the parking brake in
order to perform this operation.
• Telephone numbers edit mode
1. Press the [ r ] button to enter Telephone
mode.
2. Press the [ ..... ,
~
] button to select
"MEMORY 1" to "MEMORY 6".
3. Push the
[~/II·
ENT] knob to edit the num-
bers. A blinking cursor on current digit will be
displayed.
4. Turn the
[~/II
. ENT] knob to select a num-
ber.
5. Push the [
~/II
• ENT] knob to go to next
number input.
6. Push the [
~/II·
ENT ] knob at a blank or
the last 16
th
digit (" ..... " indicator will be dis-
played) will store the numbers into memory.
Notes:
• "+"
can be allowed in the first digit only.
• Maximum digit range: 16 digits.
• Push and hold the
[~/II
. ENT] knob for 1.5
seconds or longer at a non-blank digit will store the
numbers into memory as well.
• Press the [
~
] button at anytime will cancel current
operation and exit the Edit mode without saving the
numbers. If no operation is performed for more than
10 seconds, the Edit mode is cancelled and returns
to the previous display.
• Clearing all digits
1. During Telephone Numbers Edit mode, turn the
[~/II·
ENT] knob to select a blank digit.
2. Push and hold the
[~/II
• ENT] knob for
1.5 seconds or longer to clear all digits on the
right side.
Note:
• Digits on the left side will remain as it is. In order to
clear all the digits, always select the first character
and perform the above operation.
20
FB275BT / FB275BTB