Clarion FB275BT Owner's Manual page 11

Radio Operations
Manual tuning
There are 2 ways available: Quick tuning and
step tuning.
When you are in the step Tuning mode, the fre-
quency changes one step at a time. In the Quick
Tuning mode, you can quickly tune the desired
frequency.
1. Press the [BND] button and select the desired
FM band.
*
Press and hold the [BND] button for 1.5 seconds
or longer to switch to Manual Seek mode. Make
sure "MANUAL TUNE" is displayed briefly.
2. Tune into a station.
• Quick tuning
Press and hold the [ ..... ,
~
] button for 1.5 sec-
onds or longer to begin station tuning.
• Step tuning
Press the [ ..... ,
~]
button to perform manual
tuning.
Preset memory function
Preset memory function can store up to 18 sta-
tions:
Six stations for each of FM1, FM2, and FM3.
*
Factory default setting is empty for all channels.
Manual memory function
1. Press the [BND] button, to select a band you
want to store in the memory.
2. Press the [ ..... ,
~]
button to tune into a
desired station.
3. Press and hold one of the [DIRECT] buttons
for 1.5 seconds or longer to store the current
station into preset memory and "SAVED" will
be displayed briefly.
Auto store
Auto store is a function for storing up to 6 stron-
gest stations that are automatically tuned in
sequentially. If 6 receivable stations cannot be
received, a previously stored station remains un-
overwritten at the memory position.
1. Push and hold the
[~/II
• ENT] knob for
1.5 seconds or longer. The stations with good
reception are stored automatically to the preset
channels.
Notes:
• The stations are stored in FM3 even if FM1 or FM2
was chosen for storing stations.
• The auto store procedure may take up to 40 sec-
onds to complete.
Recalling a preset station
A total of 18 preset positions (6-FM1, 6-FM2, 6-
FM3) exists to store individual radio stations in
memory. Pressing the corresponding [DIRECT]
button recalls the stored radio frequency auto-
matically.
1. Press the [BND] button and select the desired
FM band.
2. Press the corresponding [DIRECT] button to
recall the stored station.
*
Press and hold one of the [DIRECT] buttons for
1.5 seconds or longer to store that station into
preset memory.
Note:
• If there is no preset channel stored, ". -EMPTY- -" is
displayed briefly and reverts to previous frequency
display.
Instant station recall (lSR)
Instant station recall is a special radio preset that
instantly accesses a favorite radio station at a
touch of a button. The ISR function even oper-
ates with the unit in other modes.
• ISR memory
1. Select the station that you wish to store in ISR
memory during Tuner mode.
2. Press and hold the [ISR] button for 1.5 sec-
onds or longer to store the current station
into memory and "SAVED" will be displayed
briefly.
• Recalling a station with ISR
In any mode, press the [ISR] button to turn on the
radio function and tune the selected radio station.
"(EIli "
appears in the display and the " ISR "
indicator lit on. Press the USR] button again to
return to the previous mode.
Notes:
• ISR mode cannot be accessed during Adjustment!
Manual NavigationlTelephone mode.
• If there is no station stored in ISR, ". -EMPTY· ."
is displayed briefly and reverts to previous mode
display. "ISR" indicator will not be lit on.
FB275BT I FB275BTB
11
Radio Operations
Manual tuning
There are 2 ways available: Quick tuning and
step tuning.
When you are in the step Tuning mode, the fre-
quency changes one step at a time. In the Quick
Tuning mode, you can quickly tune the desired
frequency.
1. Press the [BND] button and select the desired
FM band.
*
Press and hold the [BND] button for 1.5 seconds
or longer to switch to Manual Seek mode. Make
sure "MANUAL TUNE" is displayed briefly.
2. Tune into a station.
• Quick tuning
Press and hold the [ ..... ,
~
] button for 1.5 sec-
onds or longer to begin station tuning.
• Step tuning
Press the [ ..... ,
~]
button to perform manual
tuning.
Preset memory function
Preset memory function can store up to 18 sta-
tions:
Six stations for each of FM1, FM2, and FM3.
*
Factory default setting is empty for all channels.
Manual memory function
1. Press the [BND] button, to select a band you
want to store in the memory.
2. Press the [ ..... ,
~]
button to tune into a
desired station.
3. Press and hold one of the [DIRECT] buttons
for 1.5 seconds or longer to store the current
station into preset memory and "SAVED" will
be displayed briefly.
Auto store
Auto store is a function for storing up to 6 stron-
gest stations that are automatically tuned in
sequentially. If 6 receivable stations cannot be
received, a previously stored station remains un-
overwritten at the memory position.
1. Push and hold the
[~/II
• ENT] knob for
1.5 seconds or longer. The stations with good
reception are stored automatically to the preset
channels.
Notes:
• The stations are stored in FM3 even if FM1 or FM2
was chosen for storing stations.
• The auto store procedure may take up to 40 sec-
onds to complete.
Recalling a preset station
A total of 18 preset positions (6-FM1, 6-FM2, 6-
FM3) exists to store individual radio stations in
memory. Pressing the corresponding [DIRECT]
button recalls the stored radio frequency auto-
matically.
1. Press the [BND] button and select the desired
FM band.
2. Press the corresponding [DIRECT] button to
recall the stored station.
*
Press and hold one of the [DIRECT] buttons for
1.5 seconds or longer to store that station into
preset memory.
Note:
• If there is no preset channel stored, ". -EMPTY- -" is
displayed briefly and reverts to previous frequency
display.
Instant station recall (lSR)
Instant station recall is a special radio preset that
instantly accesses a favorite radio station at a
touch of a button. The ISR function even oper-
ates with the unit in other modes.
• ISR memory
1. Select the station that you wish to store in ISR
memory during Tuner mode.
2. Press and hold the [ISR] button for 1.5 sec-
onds or longer to store the current station
into memory and "SAVED" will be displayed
briefly.
• Recalling a station with ISR
In any mode, press the [ISR] button to turn on the
radio function and tune the selected radio station.
"(EIli "
appears in the display and the " ISR "
indicator lit on. Press the USR] button again to
return to the previous mode.
Notes:
• ISR mode cannot be accessed during Adjustment!
Manual NavigationlTelephone mode.
• If there is no station stored in ISR, ". -EMPTY· ."
is displayed briefly and reverts to previous mode
display. "ISR" indicator will not be lit on.
FB275BT I FB275BTB
11