Care And Cleaning - HAMPTON BAY 25-791-68-Y Use And Care Manual

Maintenance (continued)
Disconnect power before servicing.
Any electrical re-wiring of this appliance must be done by a qualified electrician. This wiring must be done in
accordance with local codes and/or in Canada with the current CSA C22.1 Canadian Electrical Code, and for US
installations, the National Electrical Code ANSI/NFPA NO 70.
If repairing or replacing any electrical component or wiring, the original wire routing, color coding and securing
locations must be followed.
CIRCUIT DIAGRAM
WARNING: Disconnect power before servicing.
Care & Cleaning
□ Always turn the heater OFF and unplug the power cord from the outlet before cleaning.
□ Use a vacuum or duster to remove dust and dirt from the heater and vent areas.
□ To maintain the finish, clean with a soft, slightly damp cloth and buff with a dry cloth. Never use abrasive cleansers, liquid sprays, or
any cleaner that could scratch the surface.
□ Wood furniture should never be dragged across a floor. The added stress from dragging the unit may cause the dragged edge to
splinter, or it may cause a joint to loosen.
DANGER
13
PLEASE CONTACT 855-HD-HAMPTON FOR FURTHER ASSISTANCE.
HAMPTONBAY.COM