H15-10 series
direct vent gas fireplace (56 pages)
Summary of Contents for HAMPTON BAY 75959
Page 1
THANK YOU We appreciate the trust and confi dence you have placed in Hampton Bay through the purchase of this electric fi replace. We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home imporvement...
Safety Information Please read and understand this entire manual before attempting to assemble, operate or install the product. If you have any question regarding the product, please call customer service at 1-877-527- 0313, 8 a.m.-6 p.m., EST, Monday-Friday. WARNING: This appliance is not a toy. Supervise children playing near it.
Warranty 1 Year Limited Warranty: The manufacturer warrants this product to be free from manufacturing and material defects for a period of one year from date of purchase, subject to the following conditions and limitations: Install and operate this Electric Fireplace in accordance with the installation and operating instructions furnished with the product at all times.
Pre-Assembly (continued) PACKAGE CONTENTS Part Description Quantity Hearth/Base Center Left Shelf Center Right Shelf Center Panel Left Side Panel Right Side Panel Mantel/Top Insert Support Bar Center Back Panel Front Door Stabilizer Frame Center Front Molding Positioning Panel...
Assembly Side panel installation Base installations Locate Hearth/Base (A) and set out fi nished side up on Locate the Left Side Panel (E), Center Left Shelf (B), Cen- ter Panel (D), Center Right Shelf (C), Right Side Panel (F), the fl oor. and set out face down on a scratch-free surface.
Assembly (continued) Center front molding installation Top installation Insert wood dowel (CC) into the holes in the Left/Right Insert one Wood Dowel (CC) into each of the pre-drilled Side Panel (E/F). holes on the top edges of the Assembly from step 3. Push Center Front Molding (L) snug to the Left/Right Then locate Mantel/Top (G) and lay fi...
Assembly (continued) Handle installation Door installation Attach the Handle (HH) to the Front Door (J), use the Connect the Front Door (J) to the Right Side Panel (F) bolts attached through the pre-drilled holes in the door. with the hinge pre-installed on the door, then use a Then use a Phillips Head Screwdriver to tighten the Phillips head screwdriver to tighten the Screws (EE) bolts.
Page 10
Assembly (continued) Cooler installation Cooler installation Open the Front Door (J) and cooler door, connect the Insert Stabilizer Frame (K) once the cooler is in the Front Door (J) to the cooler door with Screws (EE) correct position. Fasten the positioning panel with and Door Clip (GG), Use a Phillips Head Screw Driver wood screws (FF).
Page 11
Assembly (continued) Insert installation Install Insert From Lift insert carefully into the back of the unit and Back center in the insert opening. Do not drag insert across hearth/base as it may scratch the unit. Connect the Insert Support Bar (H) to the inside left and right panels, using the bolt (AA) and washer (BB) through pre-drilled holes.
Operation Operation NOTE: The control panel can be accessed at the upper-right corner of the insert. When a function is changed ° from the control panel or remote control there will be a corresponding indicator (see Figure 1) on the upper-right °...
Operation (continued) Replacing the remote control battery Disposing of used batteries The battery may contain hazardous substances that When the remote control stops operating or its range could endanger the enviroment and human health. seems reduced, it is time to replace the battery with new ones.
FCC/ICC Information This equipment has been tested and found to comply with the limits for Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interfer- ence to radio or television reception, which can be determined by turning the equipment off and on.
Troubleshooting PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION Check that the unit is plugged into a There is no power and the logs do not standard 120V outlet. Press the Power button There is no power to the unit. glow. several times, make sure power is set to the “ON”position.
Replacement Parts For replacement parts, call our customer service department at 1-877-527-0313, 8 a.m.-6 p.m., EST, Monday-Friday. Part No. Part Description 23EF023GRA Heater/Blower Assembly Y07-C26-P01 Main Circuit Board Y11-C53-P15 Flame Generator Drive Motor P10-Q Flame Generator/ Spinner Y10-S55-P11 LCD Display Y10-C43-P79 Front Projection Screen Y10-S55-P09...
FURNITURE MINI BAR COOLER MODEL: CR-48D-TS NOTICE: READ ALL SECTIONS BEFORE OPERATING THIS UNIT. IF THE INFORMATION IN THIS MANUAL IS NOT FOLLOWED, PROPERTY DAMAGE, AN ELECTRIC SHOCK, FIRE, INJURY TO PERSONS, OR LOSS OF LIFE MAY RESULT. GENERAL SAFETY PRECAUTIONS 1.
Page 18
Product Specifications and Parts Lists Rated Voltage 115V Rated Frequency 60 Hz Input Power 90 W Zone Temperature Control 39°F ~ 54°F / 4°C~ 12°C Note: The actual cabinet temperature in a thermal electric unit is dependant on the ambient room temperature. The above mentioned temperatures are approximations and based on an average ambient room temperature of 77°F or 25°C.
Page 19
Installation And Operation Instructions 1. Unpacking: a. Unpack the unit at close proximity of it’s final location to avoid damage while moving the unit. b. Insure that all packaging and printed materials are disposed before operation of the unit. i. There is protective Styrofoam packaging located inside the back of the wood cabinet which must be removed before operating the unit to insure proper ventilation of the coolers.
Cleaning and Maintenance Door Gaskets: Power Interruptions Vacation and Moving Care...
Page 21
Troubleshooting Cooler Cooler Does Not Operate Temperature appears too warm Temperature is too cold Moisture build up on interior or exterior of the Cooler : Cooler has an odor: Cooler door does not shut properly:...
1 YEAR LIMITED WARRANTY The manufacturer warrants that your new Furniture Cooler is free from manufacturing and material defects for a period of one year from date of purchase, subject to the following conditions and limitations. 1. Install and operate this product in accordance with the installation and operating instructions furnished with the product at all times.
Page 23
Questions, problems, missing parts? Before returning to the store call Hampton Bay Customer Service 8 a.m. - 6 p.m., EST, Monday-Friday 1-877-527-0313 HAMPTONBAY.COM RETAIN THIS MANUAL FOR FUTURE USE.