Electrical Connections - Lamona LAM2800 User's Installation Manual

LAMONA Appliances

Electrical Connections

IMPORTANT: Ensure that the electricity
supply is switched off before connecting.
Your appliance must be connected to
with at least 3mm contact separation, The isolation switch must be accessible after installation. (See
technical data for fuse rating).
The terminology DOUBLE POLE -/+ means
that both the live and neutral supplies are
switched and disconnected at the same time.
The terminations labelled SUPPLY are the
connections for the internal house wiring and the
terminations labelled LOAD are for connection to
the appliance.
WARNING: This appliance must not be earthed
Brown......Live
IMPORTANT: The wires in the mains lead are coloured in accordance with the following code:-
Blue..........Neutral
As the colours of the wires in the mains lead of this appliance may not correspond with the coloured
markings identifying the terminals in your spur box, proceed as follows;
The wire which is coloured blue must be connected to the terminal which is marked with the letter
'N' or coloured BLACK. The wire which is coloured brown must be connected to the terminal which is
marked with the letter 'L' or coloured RED.
FUSE
Fig 3.
Page _ 16
w i r i g n v a i h t e
Blue.
(Neutral)
ON
www.howdens.com
u e s f o a d o u b e l p o e l s w
LOAD
L
N
SUPPLY
LOAD
DP
250V~
N
SUPPLY
Fig 4.
t i h c e d u f e s d p s r u o t u t e l
Brown.
(Live)
L