Figure 44 Qos Iptv Classifier Configuration - SmartRG SR10 User Manual

SmartRG™ Residential Gateways
15. Select an "Ether Type" of IP (0x800).
16. Enter the source MAC and Mask values in 01:02:03:04:05:06/FF:FF:FF:00:00:00 format.
17. Assign the Classification Queue (identified by WAN interface&Precedence&Path).
18. Click Apply/Save.
19. Create the IPTV traffic classifier by selecting Advanced Setup -> Quality of Service -> QoS
Classification and click Add.

Figure 44 QoS IPTV Classifier Configuration

20. Set the Name, Rule Order, and enable the classifier rule.
IMPORTANT If you create the classifier rules in priority order (VoIP then IPTV), you may leave the
NOTE "Rule Order" set to "Last." Each successive classifier rule created will become the
last one checked in the traffic identification process.
P a g e | 52 C o n f i d e n t i a l S m a r t R G © 2 0 1 2