Creating Vendor Id Based Interface (Bridge) Groupings; Figure 35 Vendor Id Based Interface Groupings - SmartRG SR10 User Manual

SmartRG™ Residential Gateways
15. Click Apply/Save.

Creating Vendor ID Based Interface (Bridge) Groupings

To provide greater flexibility when connecting set-top-boxes to LAN ports SmartRG gateways
support "Vendor ID Based" bridge groupings. Instead of adding specific LAN ports to the bridge
group, you can specify the Vendor ID of the set-top-box. Any traffic received on any LAN port
containing the specified Vendor ID will be bridged to the designated bridged WAN connection.
To configure Vendor ID based interface groupings, add only the WAN interface(s) to the bridge
group and then specify the required Vendor ID(s) in the following list:

Figure 35 Vendor ID Based Interface Groupings

P a g e | 44 C o n f i d e n t i a l S m a r t R G © 2 0 1 2