Taiwan Electrical Emission Statement; Japanese Voluntary Control Council For Interference; (Vcci) Statement; Power Cords - IBM eServer 220 xSeries Installation Manual

Hide thumbs Also See for eServer 220 xSeries:

Table of Contents

Taiwan electrical emission statement

IBM® xSeries 220: Installation Guide

For your safety, IBM provides a power cord with a grounded attachment plug to use

with this IBM product. To avoid electrical shock, always use the power cord and plug

with a properly grounded outlet.

IBM power cords used in the United States and Canada are listed by Underwriter's

Laboratories (UL) and certified by the Canadian Standards Association (CSA).

For units intended to be operated at 115 volts: Use a UL-listed and CSA-certified cord

set consisting of a minimum 18 AWG, Type SVT or SJT, three-conductor cord, a

maximum of 15 feet in length and a parallel blade, grounding-type attachment plug

rated 15 amperes, 125 volts.

For units intended to be operated at 230 volts (U.S. use): Use a UL-listed and CSA-

certified cord set consisting of a minimum 18 AWG, Type SVT or SJT, three-conductor

cord, a maximum of 15 feet in length and a tandem blade, grounding-type attachment

plug rated 15 amperes, 250 volts.

For units intended to be operated at 230 volts (outside the U.S.): Use a cord set with a

grounding-type attachment plug. The cord set should have the appropriate safety

approvals for the country in which the equipment will be installed.

IBM power cords for a specific country or region are usually available only in that

country or region.

Table of Contents