Disassembly Procedures - Epson TM-U220 Series Service Manual

Confidential

DIsassembly Procedures

Disassembly
Part names
steps
Platen rotation frame 1
unit (1005)
Fixed blade holder
assembly (1013)
Manual cutter holder
assembly (1020)
Roll paper guide unit
(1038)
Roll paper holder (1010)
Cover open assembly
(515)
Motor paper feed sub
assembly (1046)
Rev. A
Assembly procedures
With Platen rotation frame 1 unit closed, remove E-ring 3
(E01).
Release rotation springs R and L from the hooks.
Remove E-ring 4 (E03), and remove the rotation shaft (1009).
Remove the platen rotation frame 1 unit (1005).
Remove it while spreading its sides to the right and left. (See page 2-
16.)
<For type-B only>
Remove 2 screws (S11), and remove the fixed blade holder
assembly (1013).
<For type-D only>
Remove 2 screws (S11), and remove the manual cutter holder
assembly (1020).
Remove the two screws (S05), and remove the Guide,roll
paper (1038).
Remove 2 screws (S08) with 1 ???(W02), and remove the roll
paper holder (1010).
Remove 1 screw (502) securing the cover open assembly (515).
Remove 2 screws (S11), and remove the motor paper feed sub
assembly (1046).
Remove 1 E-ring 2.3 (E02), and remove the platen fix shaft R
(1049).
Lubricate the platen fix shaft R (1049) with G-36.After this,
you can remove the base frame (1049).
Lubricate the base frame (1049) with G-36.
TM-U220 (TypeB/TypeD) Service Manual
Disassembly and Assembly 4-7