Chapter 3 Troubleshooting; Preparations For Troubleshooting - Epson TM-U220 Series Service Manual

Confidential
Chapter 3
Troubleshooting

Preparations for Troubleshooting

Before troubleshooting, check and, if necessary, correct the following points.
Paper is jammed inside the printer
CAUTION:
Be sure not to touch the manual cutter. Otherwise you may cut your finger.
1. Turn the power off.
2. Open the roll paper cover using the tab, as shown in the below illustration.
3. Remove the jammed paper.
Note:
If you turn the power off accidentally during printing, the cutter blade may stop in the paper feed path. So
paper may not be fed normally at first when you turn the power on again. If the symptom happens again
after you remove the jammed paper, follow the procedure described below.
1. Power off the unit and open the roll paper cover.
2. Remove the jammed paper.
Rev.A
TM-U220 (TypeB/TypeD) Service Manual
Roll paper cover
Tab
Troubleshooting 3-1