Epson TM-U220 Series Service Manual page 57

Confidential
DIsassembly Procedures
Apply the below procedure for disassembling the Roll Paper Holder.
Reassembly
Part names
steps
Paper end assembly (514)
Roll paper holder (1010)
Apply the below procedure for disassembling the Roll Paper Guide.
Reassembly
Part names
steps
Lead wire set NE (1096)
Paper end assembly (514)
Roll paper guide (1038)
Rev. A
Assembly procedures
Remove the paper end assembly (514).
When replace the paper end assembly (514), you need to pull out
the wire attached on the HP circuit board.(See page 2-20.)
Remove 2 screws (S05), and remove the roll paper holder
plate (508).
Remove the roll paper holder (1010).
Assembly procedures
Remove the Lead wire set NE (1096).
Remove the Paper end assembly (514).
Turn the NE detector adjustment screw (1040), and remove
the NE detector assembly (1041) and nut (N01). Then remove
the roll paper guide (1038).
TM-U220 (TypeB/TypeD) Service Manual
Disassembly and Assembly 4-13