Notes For Assembly And Disassembly - Epson TM-U220 Series Service Manual

Hide thumbs Also See for TM-U220 Series:
Table of Contents

Advertisement

Confidential
Please use the grease indicated below for lubrication.
Items
Grease
Please use the item indicated below for operaton the printer.
Items
AC adapter
Ribbon cassettes

Notes for Assembly and Disassembly

For assembly, reverse the disassembly procedures under "Disassembly".
The
symbol in the disassembly procedure indicates the item need to be checked.
The symbol in the disassembly procedure indicates the item need to lubricate.
CAUTION:
Wear a grounded wrist band when handling the internal circuit boards to prevent
damage from static electricity.
When removing an internal circuit board, place it on an anti-static rubber sheet or
similar surface to prevent damage from static electricity.
Be careful not to subject the circuit boards to shock or vibration, because this may
damage them.
Do not touch the circuit board or cable terminals with your hands to prevent
contamination that may result in a malfunction.Hold circuit boards only by their
edges.
Always remove the power supply unit from the printer before working. Power is
flowing to the internal circuit boards even if you turn the printer off at the power
supply switch. You may damage the printer if you work while the power supply is still
attached.
Remove all peripheral equipment connected to the printer before starting work.
Do not perform any work that is not described in this chapter. Doing so may result in
injury or damage to the printer.
4-2 Disassembly and Assembly
Parts cord
Note
1041442
O-13
G-15
1080605
1080619
G-36
Parts cord
Note
2081786
-
S0152440000
ERC-38(B)
S0152450000
ERC-38(B/R)
S0152460000
ERC-38(P)
Rev. A

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents