Preparing To Print; Preparing A Print Pack - Sony UP-DP10 Operating Instructions Manual

Preparing to Print

Preparing a Print Pack

Notes on Using Print Packs
14
In order to print, it is necessary to prepare a Sony Print Pack (printing paper
and an ink ribbon cartridge, sold as a set). A Sony Print Pack must be
purchased separately. The following table lists the types of Sony Print Packs
available.
Product No. Type
UPC- Photocards
10P23
UPC- Photocards
10P34
UPC- Glossy
10S01 photostickers
Note
If "Border" is selected in the printer driver, each of the print sizes will be
reduced somewhat.
• The ink ribbon cartridge is designed to allow you to print an image on each
of the sheets in the Print Pack.
• If photos taken with a digital camera that has a 3:4 aspect ratio (V:H) are
printed on the paper in a UPC-10P23 Print Pack, a white border may remain
even after cutting along the left and right perforations, or a portion of the
top and bottom of the image may not be printed on the paper.
Size/number of sheets Features
100 × 180 mm
These sheets produce prints that
(100 × 152 mm
have no white border when
after cutting) photos taken with a digital camera
25 sheets
that has a 2:3 aspect ratio (V:H)
are printed on these sheets and
the border is then cut off along
the perforations.
100 × 180 mm
These sheets produce prints that
(100 × 134 mm
have no white border when
after cutting) photos taken with a digital camera
25 sheets that has a 3:4 aspect ratio (V:H)
are printed on these sheets and
the border is then cut off along
the perforations.
100 × 180 mm
These sheets have no
25 sheets perforations, and are backed with
an adhesive.
The maximum printing area is 100
× 155 mm.