Battery Installation And Charging - AT&T AT3101 User Manual

Getting started
Battery installation & charging
The battery may have enough charge for short calls. For optimal
performance, we recommend that you charge the handset for
16 hours. You can keep the battery charged by returning the
handset to the telephone base after each use. When the battery
power is fully depleted, a full recharge takes about 16 hours.
When fully charged, the handset battery provides approximately
eight hours of talk time and four days of standby time.
1. Align the two holes
of the battery plug
with the socket
pins in the handset
battery compartment,
matching the red and
black wires to the
color-coded label.
4. Charge the handset by placing the
handset face up in the telephone base
or in the charger. The CHARGE light will
be on when charging.
IMPORTANT INFORMATION
1. Use only the supplied rechargeable battery or replacement battery (model BT8001).
2. See the Troubleshooting section on pages 8-17 for charging issues.
2. Place the
battery in the
compartment
with the wires in
the lower right
corner.
3
3. Position
the battery
compartment
cover and slide
it towards
the unit until
it clicks into
place.