AT&T AT3101 User Manual page 14

Expansion dect 6.0 cordless handset for use with the at&t at3111-2 telephone system with caller id/call waiting
Table of Contents

Advertisement

Appendix
Troubleshooting
The batteries
will not hold a
charge
I get noise,
static, or weak
signal even
when I'm near
the telephone
base
• Other electronic products can cause
interference with your cordless phone. Try
installing your phone as far away from these
types of electronic devices as possible:
television sets, VCRs, or other cordless
telephones.
• If the cordless handset is in its telephone
base or charger and the charge light does
not come on, refer to The charge light is off
in this Troubleshooting guide.
• Charge the battery in the cordless handset
for at least 16 hours. For optimum daily
performance, return the cordless handset to
its base when not in use.
• You may need to purchase a new battery,
please refer to the Battery installation and
charging section of this user's manual.
• Your phone might be malfunctioning. Please
refer to the Limited warranty section of this
user's manual for further instruction.
• If you subscribe to DSL service and if you
hear noise during conversations and/or
your caller ID features are not functioning
properly, install a DSL filter to the telephone
line between the telephone base and the
telephone line jack. Contact your DSL
provider to obtain a DSL filter.
11

Advertisement

Table of Contents
loading

Table of Contents

Save PDF