Table of Contents
Advertisement
Quick Links
www.stelpro.com
User's guide
"SIRH" series
Infrared radiator heater
models: SIRH4002W*, SIRH4203W*, SIRH6002W*
*Add R for the weather-resistant model
(Replacement component list included)
RADIATEUR INFRAROUGE
INFRARED RADIATOR
This unit complies with
the CSA and UL standards
For further information or to consult this guide online, please visit our Web site.
INS_SIRH_0511
Advertisement
Table of Contents
Related Manuals for Stelpro SIRH series
Summary of Contents for Stelpro SIRH series
- Page 1 User’s guide “SIRH” series Infrared radiator heater models: SIRH4002W*, SIRH4203W*, SIRH6002W* *Add R for the weather-resistant model (Replacement component list included) RADIATEUR INFRAROUGE INFRARED RADIATOR This unit complies with the CSA and UL standards For further information or to consult this guide online, please visit our Web site.
- Page 2 WARNING WARNING WARNING WARNING Before installing and operating this product, the user and/or installer must read, understand and follow these instructions and keep them handy for future reference. If these instructions are not followed, the warranty will be considered null and void and the manufacturer deems no further responsibility for this product.
- Page 3 The 4000 W unit can also be controlled by an independant switch that is not offered by Stelpro. The 4200 W and 6000 W units can only be controlled by an independant switch that is not offered by Stelpro. INSTALLATION For the best possible results, the following recommendations should be respected when installing these infrared radiators: ·...
-
Page 4: Electrical Connections
ELECTRICAL CONNECTIONS Connect the power leads in accordance with the electrical codes in effect. Make sure the line voltage (volt) is consistent with that indicated on the unit’s nameplate. Each unit is equipped with power leads that come in a flexible metallic duct and with a connector that is ready to be connected to an electrical box (not included). Parallel connection of the lamps: Series connection of the lamps: SIRH4002W* and SIRH6002W* models... -
Page 5: Troubleshooting
MAINTENANCE Cut off power supply at circuit breaker/fuse before cleaning the unit. Use a soft rag for dusting. The element should only be cleaned with a clean rag. Do not use abrasive or chemical cleaners because they may damage the finish and might shorten the infrared lamps’ life expectancy. Do not use cleaning products identified with these symbols: TROUBLESHOOTING PROBLEM... -
Page 6: Limited Warranty
The warranty is limited to the repair or the replacement of the unit or the refund of its purchase price, at the discretion of Stelpro. Any parts replaced or repaired within the warranty period with the written authorization of Stelpro will be warranted for the remainder of the original warranty period.
Need help?
Do you have a question about the SIRH series and is the answer not in the manual?
Questions and answers