Stelpro SDH Series Installation And User Manual

INSTALLATION
AND USER GUIDE
SDHx SERIES (SDHR, SDHI AND SDHF)
SDHXT SERIES (SDHRT, SDHIT AND SDHFT)
Product may differ from illustrations.
WARNING
Before installing or using this product, you must read and understand these instructions and keep them for future reference. The manufacturer cannot be held
responsible for anything, and the warranty will be invalid if the installer and the user do not meet these guidelines.
This product must be installed by a qualified person and connected by a licensed electrician in accordance with the electrical codes and building codes
in your area.
Failure to follow these guidelines could result in personal injury, property damage, serious injury and potentially fatal electric shocks.
Protect the unit using the appropriate breakers or fuses, by referring to the information on the nameplate.
Make sure the supply voltage (volts) corresponds to the voltage indicated on the nameplate.
This unit must be grounded.
Turn off the power of the unit at the circuit breaker/fuse before proceeding with the installation, repair and cleaning.
Make sure the device is designed for the intended application (if necessary, consult the product catalog or a representative).
If the power of the unit is insufficient for the size of the house, it will operate continuously; therefore, the product will age prematurely.
Follow the distances and positions indicated in the installation section of this guide.
If the installer or the user changed the unit in any way whatsoever, they will be liable for any damages resulting from this modification and the UL certification could
be voided.
For further information or to consult this guide online, please visit our website at www.stelpro.com
This unit complies
with CSA and UL
standards
INSSDHX1018