Table of Contents
Advertisement
Chapter 3
AGP & P2P B
AGP Aperture Size
AGP 2.0 Mode
AGP Fast Write
AGP 3.0 Calibration cycle
VGA Share Memory Size
Direct Frame Buffer
: Move
Enter: Select
F5: Previous Values
AGP Aperture Size
This setting controls how much memory space can be allocated to AGP for
video purposes. The aperture is a portion of the PCI memory address range
dedicated to graphics memory address space.
aperture range are forwarded to the AGP without any translation.
Settings: [32MB, 64MB, 128MB, 256MB, 512MB, 1G]
AGP 2.0 Mode
To configure the maximum capable performance of the AGP bus. The actual
performance depends on the display card.
Settings: [4X, 2X, 1X]
AGP Fast Write
Enable this feature can improve system performance. Enable ONLY when
your AGP Card supports Fast Write.
Settings: [Enabled, Disabled]
C
RIDGE
ONTROL
Phoenix - AwardBIOS CMOS Setup Utility
AGP & P2P Bridge Control
[128M]
[1X]
[Disabled]
[Enabled]
[64M]
[Enabled]
+/-/PU/PD: Value
F6: Fail-Safe Defaults
F10: Save
Host cycles that hit the
38
Item Help
Menu Level
ESC: Exit
F1: General Help
F7: Optimized Defaults
Advertisement
Table of Contents
