Table of Contents
Advertisement
Quick Power On Self-Test
Shortens Power On Self-Test (POST) cycle to enable shorter boot up time.
Setting
Enabled
Disabled
First/Second/Third Boot Device
Set the boot device sequence as BIOS attempts to load the disk operating
system.
Setting
LS120
Hard Disk
CDROM
ZIP100
USB-FDD
USB-ZIP
USB-CDROM
Legacy LAN
Disabled
Boot Other Device
Enables the system to boot from alternate devices if the system fails to boot
from the "First/Second/Third Boot Device" list.
Setting
Enabled
Disabled
Boot Up NumLock Status
Set the NumLock status when the system is powered on.
Setting
On
Off
Typematic Rate Setting
Enables "Typematic Rate" and "Typematic Delay" functions.
Settings: [Enabled, Disabled]
Description
Shorten Power On Self Test (POST) cycle and bootup time
Standard Power On Self Test (POST)
Description
Boot from LS-120 drive
Boot from the HDD
Boot from CD-ROM
Boot from ATAPI ZIP drive
Boot from USB floppy drive
Boot from USB ZIP drive
Boot from USB CDROM
Boot from network drive
Disable the boot device sequence
Description
Enable alternate boot device
No alternate boot device allowed
Description
Forces keypad to behave as 10-key
Forces keypad to behave as arrow keys
31
BIOS Setup
Advertisement
Table of Contents
