On A Ceiling Or Wall - Eclipse TD307MK2A Owner's Manual

On a ceiling or wall

On a ceiling or wall
This product can be installed on ceilings and walls. If installing on a ceiling or a wall, you will need to use extra screws
(sold separately). When installing the speaker, be sure to fit the safety cable.
Caution
･ Please read this owner's manual thoroughly prior to carrying out installation and connections.
･ Depending on the specific installation specialised skills may be required. In such cases, please consult a
qualified technician.
･ Installation by two people is always advised.
･ Please note the screws for fixing the product and safety cable to the ceiling are NOT supplied.
Example of installation to a ceiling or wall
Example 1.
Speaker wire
(7 mm diameter or more)
Ceiling
Wall
Leave enough
space.
Example 3.
Speaker wire (7 mm
diameter or more)
Speaker wire
( for diameter of less
than 7 mm)
Caution
Be sure to leave some space in between the speaker and the wall so that the speaker and wall do not touch.
Tip
• In the case of example 2 and example 4, the direction the base is facing will be reversed.
• In the case of example 2 and example 4, it will be necessary to adjust the assembly positions of the speaker
base and speaker arm. Refer to "Reversing the position of the speaker arm to the base" on P.24 for details on
changing the assembly positions.
Speaker wire (for diameter
of less than 7 mm)
0˚ - 30˚
Caution
Leave
Wall
Ceiling
enough
space.
60˚ - 90˚
Example 2.
Speaker wire
(7 mm diameter or more)
Ceiling
Wall
Leave enough
space.
Example 4.
Speaker wire
( 7 mm diameter
or more)
Tip
Speaker wire
( for diameter of
less than 7 mm)
- 5 -
Tip
Speaker wire
(for diameter of less
than 7 mm)
35˚ - 90˚
Caution
Wall
Leave
Ceiling
enough
space.
0˚ - 55˚
①
Speaker