Maintenance; Cleaning Should Be Provided By The User; Clean The Surfaces; Grate Cleaning Should Be Carried Out Before Each Switch-On - Ravelli o-ring User Manual

The manual reset thermostat connected to
the hopper.
AL 07
RESETTABLE
THERMAL
Combustion in the brazier is not optimal
BREAKER
due to clogging or obstructions of internal
stove ducts.
The flue is blocked.
AL 08
DEPRESSURIZA-
TION
The vacuum meter is faulty.
EACH ALARM CAUSES THE IMMEDIATE SWITCHING OFF OF THE
!
STOVE. PRESS THE SWITCH-ON KEY TO RESET THE ALARM. BEFORE
SWITCHING ON THE STOVE AGAIN, CHECK THAT THE SIGNAL HAS
BEEN REMOVED AND THAT THE BRAZIER IS PROPERLY CLEANED TO ENSURE
CORRECT RESTART.

maIntenance

Cleaning should be provided by the user

Before any cleaning operation on the stove, implement the following precautions:
• switch off the stove and disconnect the power cord with the stove in "Switched
OFF" state;
make sure all the parts of the stove are cold;
•
make sure the ash is completely cooled.
•
PLEASE READ CAREFULLY THE FOLLOWING INSTRUCTIONS TO PER-
!
FORM PROPER CLEANING. FAILURE TO COMPLY WITH THESE IN-
STRUCTIONS MAY LEAD TO MALFUNCTIONS OF THE STOVE.

clean the surfaces

To clean the surfaces of the coated metal parts, use a cloth soaked in water or
water and soap. Attention! Use of abrasive detergents or diluents can damage
the surface of the stove.

Grate cleaning should be carried out before each switch-on

To ensure proper cleaning before switching on the stove, it is necessary to check
Reset the thermostat by pressing the
button on the back of the stove.
Switch off the stove, clean the brazier and
the tube bundle and adjust the combustion
setting the Pellet/Air values.
Contact the Support Service.
Check the flue is free and clean.
Contact the Support Service.
that the brazier is clean and so that they are always excellent combustion, thus
avoiding any overheating that may cause changes in the color of the paint or
peeling of the door coating. Furthermore, poor cleaning of the brazier can cause
stove switch-on problems.
Before removing the brazier and check for any dirt inside it, remember to re-
move the "grill brazier". Once the brazier grill is clean it should be fitted in its
housing ALWAYS AFTER having installed the brazier.
Housing
Grate
Drawer ash
28